Hidly LED Gas Price Signs Instruction
RF Remote Instruction of LED Gas Sign Function of button:
1 Digit-Up -(button 1): INCREASE by one.
2 Digit-Down-(button 2): DECREASE by one.
3 Edit-(button 3): Press 1 time to enter EDIT mode, and the first digit will begin to flash.
In EDIT mode：press (button 3), the flash digit will shift to the next digit on the LEFT,
4 Shift-Right-(button 4) : The flash digit will shift to the next digit on the RIGHT,for each individual price sign.
5 Setting Brightness- (button 5) :
Press (button 5 ) to enter SET BRIGHTNESS mode, and all digit will begin to flash.
6 Switch-dot&all flash model(button 6) :
In EDIT model,press (button 6 )to switch the dot. Under the display working, press (button 6) to set flash speed.
7 Switch-digit-(button 7):
Press button (button 7)to switch the digit.
8 Confirm -(button 8) :
Press (button 8) to save all programming.
RF Remote instruction of modify digit:
Step 1: Under the display working, press（button 3) and the first digit will begin to flash.
Step 2: Press（button 1), the flash digit will INCREASE by one.
Press（button 2), the flash digit will DECREASE by one.
Step 3: Press (button 6) to switch the dot; press (button 7) to switch the digit.
Step 4: Press（button 4), the flash digit will shift to the next digit on the RIGHT,
Press（button 3), the flash digit will shift to the next digit on the LEFT.
Step 5: Press (button 8 ) to save all programming.
RF Remote instruction of setting brightness:
Step 1: Under the display working,press (button 5), all digits will begin to flash.
Step 2:Press (button 1),the sign become more bright;
Press (button 2),the price sign become darker;
"A"means auto brightness by CDS sensor.
Step 3: Press (button 8) to save all programming.
New function of all the digit flashing:
Step 1: Press (button 6), all the digits change the same: 0(still),1(fast),2.3.4.......8,9 (slow)
Step 2: Press (button 1), the flash speed will INCREASE by one.
Step 3: Press (button 2), the flash speed will DECREASE by one.
Step 4: Press (button 8) to save all programming.
Note:
1.Before you operating, please press (button 8)
2.Press the button not too fast.
Thank you for using our LED gas signs!
1 Digit-Up -(button 1): INCREASE by one.
2 Digit-Down-(button 2): DECREASE by one.
3 Edit-(button 3): Press 1 time to enter EDIT mode, and the first digit will begin to flash.
In EDIT mode：press (button 3), the flash digit will shift to the next digit on the LEFT,
4 Shift-Right-(button 4) : The flash digit will shift to the next digit on the RIGHT,for each individual price sign.
5 Setting Brightness- (button 5) :
Press (button 5 ) to enter SET BRIGHTNESS mode, and all digit will begin to flash.
6 Switch-dot&all flash model(button 6) :
In EDIT model,press (button 6 )to switch the dot. Under the display working, press (button 6) to set flash speed.
7 Switch-digit-(button 7):
Press button (button 7)to switch the digit.
8 Confirm -(button 8) :
Press (button 8) to save all programming.
RF Remote instruction of modify digit:
Step 1: Under the display working, press（button 3) and the first digit will begin to flash.
Step 2: Press（button 1), the flash digit will INCREASE by one.
Press（button 2), the flash digit will DECREASE by one.
Step 3: Press (button 6) to switch the dot; press (button 7) to switch the digit.
Step 4: Press（button 4), the flash digit will shift to the next digit on the RIGHT,
Press（button 3), the flash digit will shift to the next digit on the LEFT.
Step 5: Press (button 8 ) to save all programming.
RF Remote instruction of setting brightness:
Step 1: Under the display working,press (button 5), all digits will begin to flash.
Step 2:Press (button 1),the sign become more bright;
Press (button 2),the price sign become darker;
"A"means auto brightness by CDS sensor.
Step 3: Press (button 8) to save all programming.
New function of all the digit flashing:
Step 1: Press (button 6), all the digits change the same: 0(still),1(fast),2.3.4.......8,9 (slow)
Step 2: Press (button 1), the flash speed will INCREASE by one.
Step 3: Press (button 2), the flash speed will DECREASE by one.
Step 4: Press (button 8) to save all programming.
Note:
1.Before you operating, please press (button 8)
2.Press the button not too fast.
Thank you for using our LED gas signs!
Deutsch 
Espanol 
Francais 
Italiano 
Portugues 
Japanese 
Korean 
Arabic 
Russian 
